Custom Fence Building & Repair in the Tulsa Metro
A fence in Oklahoma has to do two things at once: stand up straight through the straight-line winds that come with spring thunderstorms, and look like it belongs on the property for the next fifteen years. AMM Construction Services builds and repairs cedar privacy fences, ranch rail fences, and gates across the Tulsa metro — from the older established neighborhoods of Claremore and Sand Springs to the new builds going up in Owasso and Bixby.
The difference between a fence that lasts and a fence that leans in three years comes down to the posts. I set every post in concrete, at the right depth for the fence height, with the concrete crowned above grade so water doesn't pool against the wood. Posts are spaced to carry the actual weight of the rails and pickets — not stretched to the maximum span to save a few dollars on material. That's the shortcut that puts a fence on the ground in the first big wind.
Cedar is my default for privacy fencing because it holds up to Oklahoma humidity and takes stain evenly. I build with kiln-dried cedar pickets, treated rails, and stainless or galvanized fasteners so you don't get the black streaks running down the boards where nails have rusted. For rural and acreage properties around Verdigris, Collinsville, and Skiatook, I build post-and-rail and ranch rail fences that handle livestock and look right on the land.
I also repair fences — replacing rotted posts, rehanging gates that have sagged, swapping blown-out sections after a storm. If your fence is mostly sound but a section failed, you don't need a full replacement. I'll tell you honestly which is which.
What's included
- Free on-site measurement and layout
- Post holes dug and set in concrete, crowned for drainage
- Pressure-treated posts and rails rated for ground contact
- Kiln-dried cedar pickets, spaced to your preference
- Ranch rail and post-and-rail options for acreage
- Gates built with diagonal bracing so they don't sag
- Hardware — hinges, latches, drops — rated for outdoor use
- Stain or seal applied on request
- Storm-damage repair and post replacement
- Haul-off of old fencing and debris
How the project runs
Text or call
Tell me what you need — full build, a repair, or just replacing a blown section. Photos help.
Site visit
I walk the line, check the grade and any slopes, locate property lines, and look at existing posts if it's a repair.
Written estimate
Lineal-foot pricing, gate costs, material choice, and timeline. Clear and itemized.
Build
Posts set and cured first, then rails, then pickets or rails. Gate hung and tested. Site cleaned up when I'm done.
Project gallery
Photos of fences work will appear here once Mike's project library is uploaded.
