918-896-2266
Hardwood flooring and trim carpentry in a Tulsa-area home

Construction Service

Flooring Installation & Trim Carpentry in the Tulsa Metro

LVP, hardwood, tile, and the trim that finishes it. Fully insured. Free estimates across the Tulsa metro.

Flooring Installation & Trim Carpentry in the Tulsa Metro

Flooring and trim are what make a house feel finished, and they're where a hurried installer leaves the evidence. AMM Construction Services installs hardwood, luxury vinyl plank, tile, and the trim carpentry that goes with it — baseboards, crown, casing, and shoe — across the Tulsa metro, with the layout and joinery standards that hold up to a close look.

Hardwood goes down over a properly prepped subfloor, acclimated to the house, with a moisture reading before the first board. I lay out from the center of the room so the borders are balanced, not from the wall where you end up with a ripped board on one side and a full board on the other. Nail pattern is staggered, starter rows are face-nailed and filled, and the expansion gap is left where it belongs so the floor doesn't buckle in August.

Luxury vinyl plank is the practical choice for a lot of Oklahoma homes — it handles the humidity, the pets, and the spill from the ice maker without complaint. I install it with the right underlayment, staggered seams that don't fall into a pattern, and tight transitions to adjacent flooring. Tile is set on properly prepped floors with the right thinset for the material, leveled before grouting, and grouted with a seal on natural stone.

Trim is where I get particular. Baseboards are coped at inside corners, not just mitered, because a mitered inside corner opens up with the seasons. Crown is cut to the actual spring angle of the molding, not a guess. Casing is scribed to the wall. Shoe mold is run tight to the floor. None of this is fast, and all of it is the difference between trim that looks installed and trim that looks fitted.

What's included

  • Free measurement and material consultation
  • Solid hardwood — nail-down installation, acclimated
  • Engineered hardwood — glue or float
  • Luxury vinyl plank (LVP) installation
  • Tile — floors, backsplashes, showers
  • Subfloor prep and leveling
  • Baseboards, shoe, and quarter-round
  • Crown molding — installed to actual spring angle
  • Door and window casing
  • Transitions, thresholds, and vents

How the project runs

1

Text or call

Tell me the room, the current floor, and what you're thinking. Photos help.

2

Site visit

I measure, check the subfloor, look at transitions to adjacent rooms, and confirm what prep the floor needs.

3

Written estimate

Material, prep, installation, and trim — itemized and free.

4

Install

Prep and acclimate first, then install, then trim. Furniture moved and protected, site cleaned up daily.

Project gallery

Photos of flooring & trim work will appear here once Mike's project library is uploaded.

Flooring & Trim project photo 1 — AMM Construction Services
Flooring & Trim project photo 2 — AMM Construction Services
Flooring & Trim project photo 3 — AMM Construction Services
Flooring & Trim project photo 4 — AMM Construction Services
Flooring & Trim project photo 5 — AMM Construction Services
Flooring & Trim project photo 6 — AMM Construction Services

Frequently asked questions

Both work, for different reasons. Hardwood gives you the look and the resale value, but it can be affected by humidity swings and it doesn't love standing water. LVP handles Oklahoma humidity, pets, and spills without complaint, costs less, and installs faster. For kitchens, baths, and basements, LVP is usually the smarter call. For living rooms and hallways where you want the real thing, hardwood is worth it. I install both and I'll give you an honest recommendation for your space.
Yes. Solid hardwood needs to acclimate to the humidity of your home before it's installed — usually a few days on site with the boxes opened. I take a moisture reading of both the subfloor and the flooring before the first board goes down. Skipping acclimation is how you get a floor that cups or gaps after the first season.
Because a mitered inside corner opens up as wood moves with the seasons — you end up with a visible gap. A coped corner is cut to follow the profile of the adjacent piece, so it stays tight even as the wood expands and contracts. It takes longer, but it's the difference between trim that still looks right in five years and trim that shows gaps in the first winter.
Usually yes, depending on the profile. Common profiles are available; custom or discontinued profiles may need to be milled. I'll look at your existing trim during the estimate and tell you how close a match I can get before we start. Where an exact match isn't possible, I'll suggest a transition that looks intentional rather than a mismatch.
A typical room of 200–400 square feet takes one to two days for LVP or tile, and two to three days for hardwood including acclimation. Whole-home installations run longer. Trim is usually a separate day after the floor. I'll give you a real timeline in your estimate.

Related work

Free Estimates · Fully Insured

Ready to build your flooring & trim?

Text me a couple photos and a sentence about what you're hoping for. I'll come out, look at it, and give you a free written estimate — no pressure, no vague ranges.

Text Mike: 918-896-2266 Request a Free Estimate Call
Call Text Mike ★ Estimate